EN 50288-7 Instrumentation Cables|PE Insulated, LSZH Sheathed & Overall Screened Instrumentation Cables (Multipair)

Instrumentation Cables

BS5308 Cable

ESI Cable

BS 6231 Cable

DEF Standard Cable

EN50288-7 Standard Cables

NF M 87-202

EN 50288-7 Instrumentation Cables
PE Insulated, LSZH Sheathed & Overall Screened Instrumentation Cables (Multipair)

RE-2Y(St)H 90°C / 300V

STANDARDS
Basic design to EN 50288-7

APPLICATION
The unarmoured LSZH sheathed cables are generally use for indoor installation and suitable for wet and damp areas. Generally, the cables are used within industrial process manufacturing plants for communication, data and voice transmission signals and services. Also used for the interconnection of electrical equipment and instruments, the LSZH sheath can reduce toxic smoke and fume emission.

FIRE PERFORMANCE

Flame Retardance (Single Vertical Wire Test)	EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2; VDE 0482-332-1; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2); CEI 20-35/1-2; EN 50265-2-1; DIN VDE 0482-265-2-1
Reduced Fire Propagation (Vertically-mounted bundled wires & cable test)	EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3-24; VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070-2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4
Halogen Free	IEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1; CEI 20-37/2-1 ; BS 6425-1*
No Corrosive Gas Emission	IEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2; CEI 20-37/2-2 ; BS 6425-2*
Minimum Smoke Emission	IEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2; CEI 20-37/3-1&2; EN 50268-1&2; BS 7622-1&2
No Toxic gases	NES 02-713; NF C 20-454
Sunlight Resistance	UL 1581 section 1200
Oil Resistance	ICEA S-73-532**

Note: Asterisk * denotes superseded standard, **Test temperature +60°C, duration 4h. Retention: min 60% of tensite strength/min.60% of elongation.

VOLTAGE RATING
300V

CABLE CONSTRUCTION
Conductor: Annealed copper solid or plain copper stranded to IEC 60228 Class 2.
Insulation: PE compound, EN 50290. 2-23.
Pairs: Two insulated conductors uniformly twisted together with a lay not exceeding 100mm
Binder tape: PETP transparent tape
Overall Screen: Aluminium/polyester tape is applied over the laid up pairs metallic side down in contact with tinned copper drain wire, 0.5mm²
Outer Sheath: Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1 (Thermosetting LSZH compound type
SW2-SW4 as per BS 7655-2.6 can be offered.). UV resistance, hydrocarbon resistance, oil resistance, anti rodent and anti termite properties can be offered as option.

COLOUR CODE
Insulation: Black / White, continuously numbered on white core(1, 2..)for multipair.
Outer Sheath: Black or blue for intrinsically safe systems

Physical AND THERMAL PROPERTIES
Temperature Range During Operation (Fixed State): -30°C – +90°C
Temperature Range During Installation (Mobile State): -5°C – +50°C
Minimum Bending Radius: 7.5 X Overall Diameter

CONSTRUCTION PARAMETERS

Caledonian Cable Code	RE-2Y(St)H
Caledonian Cable Code	No. of Pairsx2 xCross Section	Nominal Insulation Thickness	Nominal Outer Sheath Thickness	Nominal Overall Diameter	Approx. Weight
	No.x2xmm2	mm	mm	mm	kg/km
0.5mm2, Multipair
RE-2Y(St)H 2P0.5	2x2x0.5	0.35	0.9	7.6	66
RE-2Y(St)H 4P0.5	4x2x0.5	0.35	0.9	8.8	98
RE-2Y(St)H 5P0.5	5x2x0.5	0.35	1.0	9.8	118
RE-2Y(St)H 6P0.5	6x2x0.5	0.35	1.0	10.6	138
RE-2Y(St)H 8P0.5	8x2x0.5	0.35	1.0	11.3	160
RE-2Y(St)H 10P0.5	10x2x0.5	0.35	1.1	12.9	201
RE-2Y(St)H 12P0.5	12x2x0.5	0.35	1.1	13.5	236
RE-2Y(St)H 16P0.5	16x2x0.5	0.35	1.1	15.2	300
RE-2Y(St)H 20P0.5	20x2x0.5	0.35	1.2	16.9	367
RE-2Y(St)H 24P0.5	24x2x0.5	0.35	1.2	18.3	419
0.75mm2, Multipair
RE-2Y(St)H 2P0.75	2x2x0.75	0.38	0.9	8.5	87
RE-2Y(St)H 4P0.75	3x2x0.75	0.38	1.0	10.0	123
RE-2Y(St)H 5P0.75	4x2x0.75	0.38	1.0	10.9	150
RE-2Y(St)H 6P0.75	5x2x0.75	0.38	1.0	11.8	175
RE-2Y(St)H 8P0.75	8x2x0.75	0.38	1.1	12.8	220
RE-2Y(St)H 10P0.75	10x2x0.75	0.38	1.1	14.5	267
RE-2Y(St)H 12P0.75	12x2x0.75	0.38	1.1	15.1	298
RE-2Y(St)H 16P0.75	16x2x0.75	0.38	1.2	17.3	409
RE-2Y(St)H 20P0.75	20x2x0.75	0.38	1.3	19.2	480
RE-2Y(St)H 24P0.75	24x2x0.75	0.38	1.3	20.8	561
1.0mm2, Multipair
RE-2Y(St)H 2P1.0	2x2x1.0	0.4	0.9	9.2	102
RE-2Y(St)H 4P1.0	3x2x1.0	0.4	1.0	10.9	156
RE-2Y(St)H 5P1.0	4x2x1.0	0.4	1.0	11.9	183
RE-2Y(St)H 6P1.0	5x2x1.0	0.4	1.0	13.0	224
RE-2Y(St)H 8P1.0	8x2x1.0	0.4	1.1	14.0	273
RE-2Y(St)H 10P1.0	10x2x1.0	0.4	1.1	15.9	324
RE-2Y(St)H 12P1.0	12x2x1.0	0.4	1.2	16.8	383
RE-2Y(St)H 16P1.0	16x2x1.0	0.4	1.2	19.0	513
RE-2Y(St)H 20P1.0	20x2x1.0	0.4	1.3	21.1	619
RE-2Y(St)H 24P1.0	24x2x1.0	0.4	1.4	23.1	738
1.3mm2, Multipair
RE-2Y(St)H 2P1.3	2x2x1.3	0.45	1.0	10.4	122
RE-2Y(St)H 4P1.3	3x2x1.3	0.45	1.0	12.0	190
RE-2Y(St)H 5P1.3	4x2x1.3	0.45	1.1	13.4	233
RE-2Y(St)H 6P1.3	5x2x1.3	0.45	1.1	14.6	273
RE-2Y(St)H 8P1.3	8x2x1.3	0.45	1.2	15.7	330
RE-2Y(St)H 10P1.3	10x2x1.3	0.45	1.2	17.9	422
RE-2Y(St)H 12P1.3	12x2x1.3	0.45	1.3	18.9	487
RE-2Y(St)H 16P1.3	16x2x1.3	0.45	1.3	21.4	678
RE-2Y(St)H 20P1.3	20x2x1.3	0.45	1.4	23.8	790
RE-2Y(St)H 24P1.3	24x2x1.3	0.45	1.5	25.9	921
1.5mm2, Multipair
RE-2Y(St)H 2P1.5	2x2x1.5	0.45	1.0	10.8	139
RE-2Y(St)H 4P1.5	3x2x1.5	0.45	1.1	12.7	212
RE-2Y(St)H 5P1.5	4x2x1.5	0.45	1.1	14.0	259
RE-2Y(St)H 6P1.5	5x2x1.5	0.45	1.2	15.2	312
RE-2Y(St)H 8P1.5	8x2x1.5	0.45	1.2	16.4	378
RE-2Y(St)H 10P1.5	10x2x1.5	0.45	1.3	18.8	473
RE-2Y(St)H 12P1.5	12x2x1.5	0.45	1.3	19.7	548
RE-2Y(St)H 16P1.5	16x2x1.5	0.45	1.4	22.5	727
RE-2Y(St)H 20P1.5	20x2x1.5	0.45	1.5	25.0	903
RE-2Y(St)H 24P1.5	24x2x1.5	0.45	1.5	27.1	1051

Note : Other conductor sizes & core configurations are available upon request

Electrical PROPERTIES

Conductor Area Size		mm 2	0.5	0.75	1.0	1.3	1.5
Insulation thickness (nominal)		mm	0.35	0.38	0.4	0.45	0.45
Conductor resistance (20°C)		Ω/km	36.7	25	18.5	14.2	12.3
Insulation resistance (20°C)		MΩ.km(Min.)	5000
Mutual Capacitance (1 kHz)		pF/m(Max.)
		≤ 4 pairs	90	90	90	102	102
		all other pairs	75	75	75	85	85
Capacitance unbalance(1 kHz)		pF/500 m (Max.)	500
Inductance		mH/km (Max.)	1
L / R (ratio) (max.)		μH/Ω	25	25	25	40	40
Operating voltage Urms		V	300
Test Voltage	Core to Core	V	1500
Test Voltage	Core to Screen	V	1500